{
 "asset": "Nutrition vat: a standing pod with a two-chamber glass tank of nutrient liquid, six hose ports on its head, a C-shaped arm behind it, two cartridges at the rear corners, after the user's picture (2026-10-21, reference/ref_user.jpg, three views of one pod)",
 "units": "Unreal cm; ue = (x, -y, z) * 100 from Blender. Origin: on the floor under the body's middle.",
 "front": "the tank faces Unreal +Y (Blender -Y); the side the picture shows (label, knobs, grille) is Unreal +X",
 "size_cm": {
  "width_body": 50.8,
  "width_plinth": 66.4,
  "depth_without_hoses": 118.7,
  "height_head": 200.0,
  "height_with_ports": 214.0,
  "hoses_reach_behind_cm": 64.9
 },
 "static_meshes": {
  "SM_NutritionVat_Body": {
   "location": [
    0,
    0,
    0
   ],
   "materials": [
    "M_NV_Shell",
    "M_NV_ShellDark",
    "M_NV_Gap",
    "M_NV_Glass",
    "M_NV_Glow",
    "M_NV_Rubber",
    "M_NV_Chrome",
    "M_NV_Brass",
    "M_NV_Keypad",
    "M_NV_Grille",
    "M_NV_Decal",
    "M_NV_CanGlass"
   ],
   "collision": "17 UCX hulls (head, lip, tank, body, lower housing, plinth, rear block, ports' crown, the arm in seven pieces, two handles)"
  },
  "SM_NutritionVat_Fluid": {
   "location": [
    0.0,
    6.93,
    56.83
   ],
   "materials": [
    "M_NV_Fluid"
   ],
   "note": "the liquid, its pivot at its bottom on the tank's axis. Fill level: keep the mesh and cut it in the material by world height (opacity mask), from 58.0 cm (empty) to 162.9 cm (full) above the origin; scaling it in Z would push its rounded bottom through the glass"
  },
  "SM_NutritionVat_Canister": {
   "instances": [
    {
     "name": "Canister_R",
     "location": [
      21.71,
      -43.43,
      94.25
     ],
     "yaw_deg": 0
    },
    {
     "name": "Canister_L",
     "location": [
      -21.71,
      -43.43,
      94.25
     ],
     "yaw_deg": 180
    }
   ],
   "materials": [
    "M_NV_Shell",
    "M_NV_ShellDark",
    "M_NV_Gap",
    "M_NV_Glass",
    "M_NV_Glow",
    "M_NV_Rubber",
    "M_NV_Chrome",
    "M_NV_Brass",
    "M_NV_Keypad",
    "M_NV_Grille",
    "M_NV_Decal",
    "M_NV_CanGlass"
   ],
   "note": "a cartridge at each rear corner, held by clamp rings that are part of the body; its own collision (UCX_SM_NutritionVat_Canister_00); the label faces out on both"
  },
  "SM_NutritionVat_Hoses": {
   "location": [
    0,
    0,
    0
   ],
   "optional": true,
   "materials": [
    "M_NV_Hose"
   ],
   "note": "the picture's middle view only: 18 hoses out of the six ports, over the head and down behind the pod onto the floor; no collision"
  }
 },
 "lights": "M_NV_Glow: the disc in the tank's lid, a ring under the mid band, a ring at the glass's foot, a strip along the lower housing's front",
 "translucent": "M_NV_Glass (the two chambers, thin walls), M_NV_Fluid (dark teal, bubbles emissive from T_NV_Bubbles on UV0: round the tank, up)",
 "decals": "M_NV_Decal: T_NV_Decals with alpha on UV0 (side label, warning sticker, keypad digits): masked or translucent, 0.25 mm off the surface",
 "checked": {
  "clash_pairs_total": 0,
  "smallest_gaps_mm": {
   "liquid to body (glass)": 2.07,
   "NutritionVat_Canister_R to body": 4.62,
   "NutritionVat_Canister_L to body": 4.62,
   "hoses to body": 9.65
  }
 },
 "textures": [
  "T_NV_Masks (UV0, non-colour: R occlusion, G edges, B crevices)",
  "T_NV_Decals (UV0 of the decals, sRGB + alpha)",
  "T_NV_CanLabel (UV0 of the canister's glass, sRGB)",
  "T_NV_Bubbles (UV0 of the liquid, non-colour)",
  "T_NV_Perforation (UV1 of the grille, 4 mm repeat)",
  "pack: ModSci_Engineer Base/ScratchedMetal, Base/BrushedMetal, Base/Glass (UV1, metres)"
 ]
}